Open Educational Resources (OER) University of Maiduguri

Conferences - OER


  1. IMPINGEMENT HEAT TRANSFER: CHT CFD PREDICTIONS OF THE INFLUENCE OF REDUCED CROSSFLOW USING LARGE GAPS by Abubakar M. El-Jummah, Reyad A. A. Abdul Hussain, Gordon E. Andrews and John E. J. Staggs
  2. INFLUENCE OF THERMAL GRADIENT ON GAS TURBINE COMBUSTOR WALL USING IMPINGEMENT/EFFUSION COOLING TECHNIQUES: CHT CFD PREDICTIONS by A. M. El-jummah, U. Ibrahim, G. E. Andrews and J. E. J. Staggs
  3. NUMERICAL PREDICTIONS OF ENHANCED IMPINGEMENT JET COOLING WITH RIBS AND PINS IN CO-FLOW AND CROSS-FLOW CONFIGURATIONS by A. M. El-Jummah, F. A. Oluwole, G. E. Andrews and J. E. J. Staggs
  4. IMPINGEMENT JET COOLING OF GAS TURBINE COMBUSTOR WALL OF HEAT FLUX IMPOSED HOT - SIDE: CONJUGATE HEAT TRANSFER INVESTIGATIONS USING COMPUTATIONAL FLUID DYNAMIC by El-jummah A. M., Abubakar A. B., Andrews G. E. and Staggs J. E. J.
  5. GAS TURBINE COOLING SHORT HOLE ENTRY LENGTH EFFECTS: CONJUGATE HEAT TRANSFER CFD PREDICTIONS SHOWING THE INFLUENCE OF AERODYNAMICS by El-jummah A. M., Adam M. K., Mukhtar U. A.
  6. INFLUENCE OF THERMAL GRADIENT ON GAS TURBINE COMBUSTOR WALL USING IMPINGEMENT/EFFUSION COOLING TECHNIQUES: CHT CFD PREDICTIONS by A. M. El-jummah, U. Ibrahim, G. E. Andrews and J. E. J. Staggs
  7. Conjugate Heat Transfer CFD Predictions of Impingement Jet Array Flat Wall Cooling Aerodynamics with Single Sided Flow Exit by Abubakar M. EI-Jummah, Gordon E. Andrews and John E.J. Staggs
  8. Conjugate Heat Transfer CFD Predictions of Impingement Heat Transfer: Influence of the Number of Holes for a Constant Pitch-to-Diameter Ratio X/D by Abubakar M. El-Jummah, Reyad A.A. Abdul Hussain, Gordon E. Andrews and John E.J. Staggs
  9. CHT/CFD Predictions of Impingement Cooling with Four Sided Flow Exit by Abubakar M. El-Jummah, Gordon E. Andrews and John E.J. Staggs
  10. Impingement/Effusion Cooling Wall Heat Transfer: Conjugate Heat Transfer Computational Fluid Dynamic Predictions Abubakar M. El-Jummah, Gordon E. Andrews and John E. J. Staggs
  11. Impingement Jet Cooling with Ribs and Pin Fin Obstacles in Co-flow Configurations: Conjugate Heat Transfer Computational Fluid Dynamic Predictions Abubakar M. El-Jummah1, Gordon E. Andrews2 and John E. J. Staggs
  12. Impingement/Effusion Cooling Wall Heat Transfer: Reduced Number of Impingement Jet Holes Relative to the Effusion Holes Abubakar M. El-Jummah
  13. Conjugate Heat Transfer CFD Predictions of the Influence of the Impingement Gap on the Effect of Crossflow by Abubakar M. El-Jummah, Gordon E. Andrews and John E.J. Staggs
  14. Conjugate Heat Transfer CFD Predictions of the Surface Averaged Impingement Heat Transfer Coefficients for Impingement Cooling with Backside Cross-flow by Abubakar M. El-Jummah, Reyad A. A. Abdul Hussain, Gordon E. Andrews and John E.J. Staggs
  15. Conjugate Heat Transfer CFD Predictions of Impingement Jet Array Flat Wall Cooling Aerodynamics with Single Sided Flow Exit by Abubakar M. EI-Jummah, Gordon E. Andrews and John E.J. Staggs
  16. INVESTIGATING THE SUITABILITY OF SELECTED STRUCTURAL MATERIAL FOR THE BLADE OF AN HORIZONTAL AXIS WIND TURBINE by M. Shuwa, G. M. Ngala and A. M. El-jummah
  17. Air Permeability Influence On Sorghum Yield in A Semi-Arid Region of Nigeria
  18. Prospects of Sand Filtration and Moringa oleifera Seed Solution in Wastewater Treatment for Low-Tech Drip Irrigation
  19. Influence of Soil Compaction On the Early Growth of Sesame Seeds in A Sandy Loam Soil
  20. Mathematical Modeling and Simulation of the Kidney Hemodialysis
  21. Effect of Temperature on Products Compositions of Beech Wood Pyrolysis
  22. A Reinforcement Learning Based Clustering and Cooperative Channel Sensing Algorithm for Cognitive Radio Wireless Sensor Network
  23. An Approach for Optimal Placement of UPFC for Power Loss Minimization
  24. A Hybridized SVM-kNN-pdAPSO Approach to Intrusion Detection System
  25. Assessment of the Cost Implication of Water Leakages from Pipes in some selected Locations of University of Maiduguri, Maiduguri, Nigeria
  26. Quality Evaluation of DUBLA, a Traditional Snack Produced from Wheat and Soybean Blends
  27. Modelling and Simulation of a Solar Brick Oven for Bread Baking
  28. Conceptual Model for Learning Automobile Transmission Systems: A Case Study: Gearbox
  29. Grain Size Analysis of Billiri and Damaturu Moulding Sand for Foundry Application
  30. Data-Driven Self-Optimizing Control for Petroleum Reservoir Waterflooding
  31. Production and Characterization of Activated Carbon (AC) From Groundnut Shell and Its Application in Water Treatment
  32. Modeling and Simulation of Wind-Solar Hybrid Energy System for Power Supply in Semi-Arid Region of Northern Nigeria
  33. Comparative Analysis of Jatropha Curcas and Neem Leaves Extracts as Corrosion Inhibitors on Mild Steel
  34. Estimates of Soil Losses on Major Agricultural Soils under Common Farming Practices - J. M. Dibal, N. A. Abubakar, A. U. Bashir and B. Baraya
  35. Extraction of Biodiesel from Microalgae by Direct In Situ Method - S. Kiman, B. K. Highina, U. Hamza and F. Hala
  36. The Potential of Gombe Phosphate Rock as Feedstock for Fertilizer and Phosphoric Acid Production - H. I. Mohammed, I.M. Idriss, U.A. Isah
  37. Adsorption Isotherm of Functionalized Oil fly ash for CO2 Adsorption - A. L. Yaumi, M.M. Aji, U. A. Isah and B.K. Highina
  38. Solid materials for carbon dioxide Adsorption: A Review - A. L. Yaumi, U. A. Isah and M. M. Aji
  39. An Investigation of Geotechnical Properties of Bama Ridge Soil as a Suitable Sub Grade Material in Road Construction - A.M. Kundiri, A.S. Muhammed and I.S. Muhammad
  40. Desiccation – Induced Shrinkage Strain of Compacted Granite Residual Soil Mixed with Palm Oil Fuel Ash - A. S. Muhammed, N. N. Nik Daud and A. M. Kundiri
  41. Simulation of Boost DC-DC Converter by MATLAB/Orcad Software Interfaced Using SLPS - M. Abdulkadir
  42. Optimal Placement of UPFC Using Differential Evolution Algorithm for Improved Voltage Stability - M. Mustapha, B. U. Musa, U. A. Benisheikh, M. A. Sarki
  43. Evaluation of Quality Characteristics of Awara Produced from Different Coagulant - A. I. Maijalo, L.K. Hyelsinta and R. Bello
  44. Physicochemical and acceptability of Biscuits as affected by Cereals and Legume type - L. K. Hyelsinta and A. I. Maijalo
  45. Field Studies of Thermal Environment of a Naturally Ventilated Classroom: A Case Study of University of Maiduguri - A.B. Muhammad, S. Shodiya, M.B. Oumarou, G.M. Ngala, and T.T. Rikwen
  46. Performance Evaluation of Downdraft Gasifier Fueled Using Rice husk and Sawdust - S. A. Abdulrahman A. B. Abubakar A. M. El-jummah
  47. Assessment of Honey as Corrosion Inhibitor on Mild Steel - M. K. Adam, P. O. Odola and I. S. Aji
  48. Investigating the Performance of Box-type Solar Cooker Using Modelling and Simulation Techniques- H. Musa, G. M. Ngala and M. B. Maina
  49. Investigation of Energy Harvesting at Flange-end of a Blind-tee Using Two-phase Flow- U. A. Mukhtar, A. M. El-jummah and M. K. Adam
  50. Lubricity Assessment of Neem Seed Oil for Machining Mild Steel - I.S. Aji, S.A. Abdulrahman and O. V. Odigwe
  51. Feasibility Study of Solar-Wind Hybrid Power System for Maiduguri area of Nigeria - A. B. Muhammad, S. Shodiya and G. M. Ngala
  52. Nonlinear Model Predictive Controller (NMPC) for Oil Reservoir Waterflooding- A. S. Grema, L. T. Popoola and K. G. Atiku
  53. Rapid Prototyping of Digital Systems: The Role of Field Programmable Gate Arrays - C. U. Ngene and P. Y. Dibal
  54. Assessment of R430A Refrigerant as a Possible Substitute to R134a Refrigerant in Large Capacity Freezer - S. Shodiya, M.B. Oumarou and A.T. Abdulrahim
  55. 4-bit Serial Adder with Accumulator: Modelling and Design Using Simulink, Hardware Realization using Spartan 6 FPGA - P. Y. Dibal and C. U. Ngene
  56. A Model for Pre-Assessment Study of Wind Energy Potential for Borno State - A. B. Muhammad, A. T. Sulaiman and S. Shodiya
  57. Assessment of Neem Seed Oil for use as Brake Fluid - I. S. Aji, S. A. Abdulrahman and O. V. Odigwe
  58. Impingement Jet Cooling of Gas Turbine Combustor Wall of Heat Flux Imposed Hot - Side: Conjugate Heat Transfer Investigations Using Computational Fluid Dynamic - El-jummah A. M., Abubakar A. B., Andrews G. E. and Staggs J. E. J.
  59. Optimization of Petroleum Production System using Hybrid Genetic Algorithms - A. S. Grema, M. A. Musa and U. A. Isah
  60. Pinch Analysis of Benzene Production Process via the Hydrodealkylation of Toluene - I. M. Idriss, H. I. Mohammed and B. K. Highina
  61. Gas Turbine Cooling Short Hole Entry Length Effects: Conjugate Heat Transfer CFD Predictions Showing the Influence of Aerodynamics - El-jummah A. M., Adam M. K. and Mukhtar U. A.
  62. Process Heat Integration: A Review - U. A. Isah, A.L. Yaumi and M.M. Ahmed
  63. Retrofitting a Single-Pressure Nitric Acid Plant Using Pinch Technology - H. I. Mohammed, I. M. Idriss, B. K. Highina
  64. Modelling of Unified Power Flow Controller (UPFC) for The Control of Real and Reactive Power Flow on 500 kV Interconnected Power System. - M. Mustapha, B. U. Musa, Mala U. M. Bakura
  65. Hydrodynamic Studies of an Injection Flow-Conduit Using Computational Fluid Dynamics (CFD) - M. N. Idris, B. Tijjani and F. U. Mukhtar